Loctite 3D PRO476 Black Resin - 1kg
Loctite 3D PRO476 Black Resin - 1kg
LOCTITE 3D PRO476 är en höghållfast fotoplast med god slagseghet, måttlig värmebeständighet och utmärkt ytfinish. Den är idealisk för en mängd olika prototyp- och verktygstillämpningar och kan bearbetas, gängas eller poleras för slutlig finish. LOCTITE 3D PRO476 är formulerad för optimal utskrift på LCD-skrivare.
- Hög slagtålighet
- Måttlig värmebeständighet, HDT 60°C
- Utmärkt ytfinish
20 in stock
Couldn't load pickup availability
Share
LOCTITE 3D PRO476
LOCTITE 3DP PRO476 is a high-strength photopolymer with good impact resistance, moderate heat resistance and excellent surface finish.
The resin is ideal for a variety of prototyping and tooling applications and can be machined, threaded or polished for final finish.
LOCTITE 3D PRO476 is formulated to print optimally on LCD printers with a wavelength of 405 nm.
Advantages:
- Tough
- High impact resistance
- Moderate heat resistance, HDT 60°C
- Excellent surface finish
Ideal for:
- Textured and highly detailed parts
- Performance prototypes
- Jigs, fixtures and manufacturing aids
- Housing and shelter
Notes
- For good printing results, a resin temperature between 25-30 degrees is recommended.
- Shake well before use. Avoid direct sunlight during use.
- Store the resin bottle in a dark place and sealed at room temperature.
- It is recommended to store resin between 15 – 35 degrees in its original packaging
- Avoid dusty and humid environments
Important information
Safety data sheet
- Keep out of reach of children. Do not consume.
- ALWAYS wear gloves and avoid direct contact with skin.
- Use in a well-ventilated area.
- In case of contact with skin, rinse immediately with plenty of water. Seek medical attention if necessary.
- Finished prints need to be washed in IPA/highly concentrated alcohol