Loctite 3D IND5714 Gray Resin - 1kg
Loctite 3D IND5714 Gray Resin - 1kg
Loctite 3D IND5714 is a grey elastomer with high rebound properties and excellent resistance to repetitive loads. Shore A hardness combined with excellent compression set, good tear strength and strength make this material ideal for use in a variety of industrial elastomeric applications for safe touch.
- Safe touch and high rebound
- Improved processing with excellent H&S Rating
- TPO-free
- Resumption of printing in case of power interruption
2 in stock
Couldn't load pickup availability
Share

Loctite 3D IND5714
LOCTITE 3D IND5714 is an industrial elastomer with a low hazard rating, low Shore A hardness and excellent resistance to repetitive loading. The properties of LOCTITE 3D IND5714, including high rebound properties, excellent elongation at break and low modulus, make it an ideal choice for cushioning and damping applications across a wide range of industries.
Advantages:
- Excellent H&S classification and TPO-free
- Improved processing
- High rebound and excellent compression properties
- Soft feel and high stretchability
Ideal for:
- Damping and shock absorbing applications such as shock absorbers, gaskets and seals
- Sporting and consumer goods
- Soft robotics (grippers, prostheses)
Notes
- For good printing results, a resin temperature between 25-30 degrees is recommended.
- Shake well before use. Avoid direct sunlight during use.
- Store the resin bottle in a dark place and sealed at room temperature.
- It is recommended to store resin between 15 – 35 degrees in its original packaging
- Avoid dusty and humid environments
Important information
Safety data sheet
- Keep out of reach of children. Do not consume.
- ALWAYS wear gloves and avoid direct contact with skin.
- Use in a well-ventilated area.
- In case of contact with skin, rinse immediately with plenty of water. Seek medical attention if necessary.
- Finished prints need to be washed in IPA/highly concentrated alcohol